1.00in I.D. Blue Convoluted Flex Hose | 8 Feet

Introduction

Flex Technologies C20FLX-100-96 convoluted silicone flex hose, 1.00 in inside diameter, 8-foot (96 in) length in blue. Convoluted (corrugated) wall lets the hose flex tightly around obstructions while resisting kinking under suction used where straight silicone hose cannot make the bend without collapsing or where chassis movement requires a flexing run.

Signs You Need a New Flex Hose

• Cracked or torn convolutions, especially at fittings
• Coolant or air leaks at the clamps
• Hose collapsing under vacuum or twisting under chassis movement
• Soft, oil-saturated, or swollen rubber on the existing flex run

Specifications

Applications

This convoluted silicone flex hose is used where flexibility and kink resistance are critical:

• Tight radius coolant routes around accessories, exhaust, and chassis hardware
• Charge-air / air-intake routing where chassis flex would fatigue straight hose
• EGR-cooler return loops, heater lines through bulkheads, and surge-tank fill lines
• Heavy-duty trucks, buses, marine engines, and industrial machinery requiring 65F to 350F service

Specify helical-wire-reinforced version when sustained vacuum or compression loading is expected on the run.

Cut hose clean and square at installation. Use silicone-rated worm-gear or T-bolt clamps; standard worm-gear clamps will eventually cut into silicone. Verify inside diameter and length match your application before ordering.