1/2 Male Flare X 1/2 MIP Adapter | Brass

Introduction

Brass straight-connector adapter with one 1/2 in. male SAE 45 flare end and one 1/2 in. male NPTF pipe end, used to step a flared tubing run into a female-NPTF port on heavy-truck fuel, lube, refrigeration, and instrumentation lines. The Midland Industries 10269 carries SAE J512 flare geometry on the flare side and SAE J476 / J1453 NPTF Dryseal threads on the pipe side; 0.87 in. hex, 1.79 in. overall length.

Specifications

Cross References

This adapter replaces or is equivalent to the following part numbers:

• Also known as: 04048-0808, 11707-208, 14888, 148880, 248-88, 24888, 248X8X8, 48-88, 48-8D, 48F-8-8, 48x8x8, 48X8X8-CT, 50635K387, F48-8-8, RU1-8D, U1-8D

Applications

Used as a flare-to-pipe transition on:

• Heavy-truck fuel-supply and -return lines
• Lube-oil, transmission, and instrumentation lines using SAE 45 flared tubing
• Refrigeration and HVAC plumbing on auxiliary equipment

Verify the flare angle (SAE 45 vs JIC 37) and tubing material before assembly. Use NPTF-compatible thread sealant on the pipe end.